Duranate™ is produced in standard, special-purpose, and function-specific versions for applications ranging from paints and coatings to adhesives, films, inks, resins, and other fields.
Typical types and grades are shown here. For information on the full spectrum and selection of grades that will meet your needs, contact your Duranate™ representative.
Ⅰ. Two-pack grades
| Basic structure* | Standard | Fast-drying | Low-viscosity | LPS gradesa |
High-flexure | |
|---|---|---|---|---|---|---|
| Biuret |  |
24A-100 22A-75PX |
21S-75E | – | – | – |
| Isocyanurate (Trimer) |
 |
TPA-100 TPA-90SB TKA-100 TKA-90SB |
MFA-75B MHG-80B |
TLA-100 TUL-100 TMA-100 |
TSA-100 *1 TSS-100 *1 |
– |
| TSE-100 | ||||||
| Adduct |  |
– | – | – | – | E402-80B E405-70B |
| AE700-100 | ||||||
| Bifunctional prepolymer |
 |
D101 *1 D201 *2 |
– | A201H | – | |
| – | – | |||||
R ; -(CH2)6-
aCompatible with low-polarity solvents (LPS). 1Low-viscosity. 2High-flexure
Ⅱ. Water-dispersible grades
| Standard | High-dispersion | High-flexure | long-pot life |
|---|---|---|---|
| WB40-100 WT31-100 |
WB40-80D※2 WL72-100 |
WE50-100 | WR80-70P |
Ⅲ. Blocked-isocyanate grades
| Hydrophobic | Hydrophilic | ||
| Standard | Low-temp. curing |
High-flexure | Low-temp. curing |
| 17B-60P TPA-B80E |
MF-B60B MF-K60B SBN-70D※3 TBN-75PS SBL-100 |
E402-B80B | WM44-L70G |
Ⅳ. Monomer
| 50M-HDI |
a: Compatible with low-polarity solvents (LPS).
※1: Low-viscosity
Grade-number suffixes (exceptGrade-number suffixes (except monomer)
Numerals.. Non-volatile content (%)
Letters…… Appropriate solvents
E: Ethyl acetate T: Toluene
B: n-Butyl acetate X: Xylene
P: PMA Propyleneglycol monomethylether acetate
D※2: Diethyleneglycol diethylether
D※3: Dipropyleneglycol monomethylether
G: Dipropyleneglycol dimethylether
S: Solvent naphtha
Grade selector for primary target function
